Table of Contents
Advertisement
Application and functions
1.10 Scope of delivery, accessories, requirements
When using the "TeleControl Basic" protocol
● Master station PC with accessories
● Router e.g. SCALANCE M812
● TCSB software:
– For RTU3030C:
You will find information on this in the manual, see /4/ (Page 296).
When using the "SINAUT ST7" protocol
● TIM module as communications partner
● STEP 7 for configuring communications partners
When using the DNP3 or IEC protocol
● Master station
– PC with accessories
– The relevant master application
– Security module SCALANCE S
● OpenVPN server
To use the DNP3 and IEC protocols you need to use the OpenVPN protocol. You require:
– An OpenVPN server or SINEMA RC, see section Security functions for
– The CA certificate of the server
– The configuration of the client on the OpenVPN server
Importing the files for authentication of the RTU is described in the section VPN
(Page 126).
Accessories for mobile wireless communication
The following accessories are necessary if the RTU communicates with a master station
using mobile wireless, if data of the station is to be sent by SMS or e-mail or if the RTU is to
synchronize its time of day via the mobile wireless network (also via NTP).
● Antenna
Only use antennas from the accessories program for the RTU, refer to the section
Antennas and accessories (Page 282).
● Cabinet feedthrough for the antenna and flexible connecting cable for the protective
housing
See appendix Antenna accessories, screw connections (Page 284).
● Mobile wireless contract / SIM card
If the RTU is to communicate with a partner in the master station using the mobile
wireless network, you require a suitable mobile wireless contract with associated SIM
36
TeleControl Server Basic V3.0 + SP2 (or higher)
communication (Page 28).
Operating Instructions, 09/2017, C79000-G8976-C382-04
RTU3030C
Advertisement
Table of Contents
