Table of Contents
Advertisement
Table
The table shows all recipient groups and their configured data.
● Add
Creates a new group.
When creating a new group, you need to assign the name and select the group type. You
can leave the description empty and complete it later.
You must assign at least one user to be able to save the new group.
● Delete
Deletes the group selected in the table above.
When you click the "Delete" button, two buttons are displayed as a prompt for
confirmation:
– Delete
– Cancel
You configure the individual groups below the table.
Change group
Select a group in the table with the mouse.
● Name
Enter the group new name.
● Description
As an option, you can enter a description of the group.
● Group type
Using the drop-down list, you specify which message type the group will receive:
Specifying group members
Using the list of all configured users at the bottom of the page, you specify the members of
the group selected in the table above.
Select the check box to the left of the user name to assign this user to the recipient group.
RTU3030C
Operating Instructions, 09/2017, C79000-G8976-C382-04
Deletes the selected group irrevocably.
Cancels the deletion and the normal picture of the WBM page is shown again.
Configuration (WBM)
4.16 User / Recipient
137
Advertisement
Table of Contents
