Sd Card; Toolbox Dvd; Spare Parts - Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual

Filter rated current (A)
5
12
20
24
36
74
2.1.5.6

SD card

An SD card can be used to copy drive parameters or perform a firmware update. Siemens recommends you to use the
Siemens SD card (article number: 6SL3054-4AG00-2AA0).
You can also select other high quality SD cards with a maximum capacity of 2 GB from manufacturers such as KINGMAX,
Kingston or SanDisk.
2.1.5.7

Toolbox DVD

The Toolbox DVD (article number: 6FC5811-0CY00-0YA8) provides necessary software tools to integrate the control system
into a machine tool. Under the Toolbox DVD root directory, it contains a file "setup.exe". After starting this file the program
guides you through installing the following software on the computer:
● Access MyMachine
– Access MyMachine (AMM) is a tool that allows the commissioning engineer to exchange files between the computer
and the control very easily through the Ethernet interface. For data transmission, the control can be connected to the
computer directly or via the local network.
● PLC Programming Tool
– PLC Programming Tool makes a connection between the programming tool and the control system. The
commissioning engineer can program and debug the PLC inside the control system.
● Config DATA
– Config_DATA contains the configuration data setup. The setup will install the configuration data for the control system
to your computer. The configuration data consist of the Siemens examples, and the user documents.
2.1.6

Spare parts

Connectors for V70 drives
You can order a connector kit (article number: 6SL3200-0WT01-0AA0) from Siemens which consists of the following
connectors for the V70 drive. Alternatively, you can also purchase the individual connectors from the suppliers with the
corresponding supplier article numbers when necessary.
Components Quantity
Line supply con- 1
nector
Motor power/braking 1
resistor connector
(with a short-circuit
stick pre-assembled)
Holding brake con- 1
nector
STO/24 V power 1
supply connector
STO short-circuit 1
stick
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018
Screw driver
Slot head (M3 screw)
Slot head (M4 screw)
Inside hexagon (M6 screw)
Illustration
Max. tightening torque (Nm)
0.8
1.5
2.4
3.7
Supplier Article number
DINKLE 0183-01S2264904T02
DINKLE 0183-01S2265107T03
DEGSON 2EDGKDF-5.08-02P-1Y-
32 AH
DEGSON 2EDGKDF-5.08-05P-1Y-
31 AH
Phoenix 1733172
Stripping length (mm)
8
10
11
18
Applicable drive
variants
V70 feed drive FSA
V70 feed drive
FSA/FSB/FSC
All V70 drives
37