Table of Contents
Advertisement
Preface
Purpose of the manual
This manual describes the properties of this device and shows application examples.
The manaul supports you when installing, connecting up and commissioning the device.
The required configuration steps for the device are described.
You will also find instructions for operation and information about the diagnostics options.
Required experience
To install, commission and operate the device, you require experience in the following areas:
● General electrical engineering
● Automation engineering
● Data transfer via mobile wireless networks and Internet
Abbreviations/acronyms
This manual often uses the following abbreviations/acronyms:
● RTU
The name "RTU" (Remote Terminal Unit) is used instead of the full product name
"RTU3030C".
● WBM
"WBM" the acronym for the "Web Based Management" of the Web pages of the RTU for
configuration and diagnostics data.
● TCSB
Acronym for the control center software "TeleControl Server Basic" which is installed on a
PC, the telecontrol server.
New in this release
● New battery expansion module for the accessories program of the RTU
● New firmware version with the following new functions:
– Support of the telecontrol protocol "SINAUT ST7"
– FTP client
– Connection to SINEMA Remote Connect
– new program blocks:
– New functions of the WAN interface: DynDNS, HTTPS
– New functions of LAN interface: Router, HTTPS, DHCP client, DNS
– Further functions, including: TeleService SMS with dedline, OpenVPN key with
4
FTP file transfer, analog value processing, difference threshold value switch, flow
totalizer, flow calculation rectangular weir, silo volumes, wiping relay, time relay
password
Operating Instructions, 09/2017, C79000-G8976-C382-04
RTU3030C
Advertisement
Table of Contents
