Table of Contents
Advertisement
Configuration (WBM)
4.3 General functions of the WBM
Symbol
Entering and saving
Confirm all your entries by clicking the "Apply" button. Your settings are then adopted by the
device. With some parameters this can take a few seconds. This is visible thanks to a
progress bar.
Grayed out boxes are preset by the system and cannot be changed.
Note
Data loss when changing the WBM page without saving
If you do not save your input with the "Apply" button, your input will be discarded without a
prompt for confirmation when you change WBM pages.
Incorrect entries in the configuration
In many input boxes of the WBM, the content is checked for missing content or consistency
when you save. Boxes with detected errors or illegal characters are marked with a red
border.
Figure 4-1
With some incorrect entries an additional message is also displayed. The settings are only
applied after the error has been corrected.
76
Function
Switches off the automatic updating of the WBM.
Only on pages on which no entries can be made.
Updates the current display on WBM pages on which entries can be
made.
During the update a progress bar is visible.
Opens the Internet page of the RTU in the Siemens Industry Online
Portal.
Here, you will find all entries for the product.
Open / save Open Source software license conditions of the RTU
Example of an input box with a detected incorrect entry
Operating Instructions, 09/2017, C79000-G8976-C382-04
RTU3030C
Advertisement
Table of Contents
