Table of Contents
Advertisement
Programming
5.9 Blocks for messages
Parameters
Function parameters
File
Compressed and en-
crypted
Server path
Append
Output parameters
Done
Error
244
Tag type / range of
Description
values
This parameter specifies which data is transferred
Entire diagnostics
•
to the FTP server during the FTP transfer.
buffer
Current log file
•
Current process
•
image
ON / OFF
Transfers the file as a compressed ZIP archive. As
an option, the ZIP archive can also be encrypted
(see WBM: "Services > FTP").
Path 1 .. 8
Selection of one of the FTP server paths". specified
in "Services > FTP
If you do not make a selection (not used) the stand-
ard path of the FTP server will be used.
ON / OFF
With the setting "ON" the transferred file is append-
ed to an existing file of the same name on the serv-
er.
With the setting "OFF" an existing file that may be
on the FTP server is replayed.
If the file is transferred as a ZIP archive, the option
"Append" cannot be used.
Status display:
Digital output / bit
•
memory
•
•
Error display:
Digital output / bit
•
memory
•
•
0: FTP transfer could not be entered in the
transfer list. The list is possibly full.
1: FTP transfer successfully entered in the
transfer list.
0: Block processing completed without errors
1: Block processing aborted with an error.
FTP transfer could not be saved. See also sec-
tion Often used parameters (Page 198).
Operating Instructions, 09/2017, C79000-G8976-C382-04
RTU3030C
Advertisement
Table of Contents
