Table of Contents
Advertisement
Select a user in the table with the mouse.
● Name
Name of the user (not the user name)
● Companydepartment/positiion
Here, you can configure organizational characteristics of the user.
● Phone number
The phone number of the user configured here is the authorized telephone number for
waking the RTU and for receiving SMS messages by the RTU.
For these functions the user requires a phone with the number entered here. The
telephone must support the CLIP function (transfer of its own call number).
Configuring the phone number
– You will find the characters permitted in the section Permitted characters and
– An asterisk (*) after the body of the telephone number gives the right to establish a
– If only an asterisk (*) is entered in the input box , the RTU wake-ups / SMS messages
● Wake-up call allowed
Only when this option is enabled does the RTU allow receipt of a wake-up call by this
user.
You will find further notes on waking the RTU in the section Wake-up call / wake-up SMS
(Page 192).
● Allow receipt of SMS messages
Only when this option is enabled does the RTU evaluate wake-up SMS messages or
request SMS messages for a diagnostics SMS message from this user.
Make sure that the receipt of SMS messages by the RTU is enabled on the WBM page
"WAN" > "SMS".
● E-mail address
E-mail address of the user for receiving e-mails sent by the RTU.
RTU3030C
Operating Instructions, 09/2017, C79000-G8976-C382-04
parameter lengths (Page 77).
connection to all phones that have a phone number that includes the phone number
body (e.g. body + extension number).
Example: The entry +49-123456* entitles the following phone numbers:
+49-123456-0, +49-123456-1, +49-123456-2 ...
+49-123456-100, +49-123456-101 ...
from all senders.
Remember that with this option, the authorization is lost and due to incorrect calls
costs for connection establishment attempts may result.
Configuration (WBM)
4.16 User / Recipient
135
Advertisement
Table of Contents
