Table of Contents
Advertisement
● Type
Assign the tags to one of the following types:
– Analog value
– Counter
● Initial value
Optional: Enter an initial value that the tag uses as a basic value.
● Current value
Display of the current value of the tag
● Read
Click on the button to display the current value of the tag.
● Preset value
Optional: You can write the the value entered here to the tag.
● Write
Click the button to write current preset value to the tag.
Format
● Unit
● Format
● Logging
See section Configuration of the tags , general parameters (Page 150).
4.18.7
Temperature (Internal)
Note the characters permitted for the input boxes, see section Permitted characters and
parameter lengths (Page 77).
Temperature (Internal)
Parameters
● Active
● Name
● Temperature unit
Select the physical unit for the internal temperature.
RTU3030C
Operating Instructions, 09/2017, C79000-G8976-C382-04
The tag type is intended for analog signals.
Formats of the tags: Floating-point number with sign (32 bits)
The tag type is intended for counter inputs.
Formats of the tags: Integer without sign (32 bits)
Configuration (WBM)
4.18 Tags
163
Advertisement
Table of Contents
