Table of Contents
Advertisement
Configuration (WBM)
4.9 System
● When the SD card is full
Here you specify whether a message is sent if there is no longer any free on the SD card.
The check for free memory space only takes place when logging is enabled and at least
one variable has been logged.
● Subject and text
Here, you enter the text and subject of the message.
Loading files
● Load new file
After selecting a file stored on the configuration PC using the "Search" button, the file
name is displayed here.
● Search
Searches the file system of the configuration PC for a file saved there that is intended to
be loaded on the RTU.
● Load on device
By clicking the button, you download the selected file to the RTU.
Successful loading is displayed.
Savable files below the parameter area
Below the parameter area, the names of the files saved on the SD card are displayed. By
clicking on the file name, you can save the file from the SD card to the file system of your
PC.
Naming conventions for the file names
Files that were written to the SD card from the RTU, meet the DOS format:
<1...8 characters>.<1...3 characters>
The file names are structured according to the following scheme:
● Configuration files
Files with configuration data of the RTU:
*.CFG
– The file "default.cfg" is created automatically by the RTU and updated with every
– The file "user.cfg" is a file created manually by users ("Maintenance" >
92
change to the configuration.
"Configuration").
Operating Instructions, 09/2017, C79000-G8976-C382-04
RTU3030C
Advertisement
Table of Contents
