Wan; Overview - Siemens SIMATIC RTU3030C Operating Instructions Manual

Telecontrol - rtu
Hide thumbs Also See for SIMATIC RTU3030C:
Table of Contents

Advertisement

Configuration (WBM)

4.13 WAN

4.13
WAN
4.13.1

Overview

The following information on the mobile wireless connection of the RTU is displayed in the
Overview.
Mobile wireless connection
● Status of the SIM card
– Check mark on a green background
– Cross of a red background
● Connection established
Connection status to the mobile wireless network
● Connected since (dd:hh:mm:ss)
Duration of the existing mobile wireless connection
● Connection to data service established
Status of the connection to the data service GPRS or UMTS
● Data connection since (dd:hh:mm:ss)
Duration of the existing connection to the data service
● Signal strength CSQ (dbm)
– CSQ = 0 .. 8 (-112 .. ≤ -97 dBm): No reception possible
– CSQ = 9 .. 16 (-95 .. -81 dBm): Medium signal quality
– CSQ = 17 .. 31 (≥ -79 dBm): Good signal quality
– CSQ = 99 (≤ -113 dBm): No signal detectable
● APN used
Name of the APN
● IMEI
International Mobile Equipment Identity of the manufacturer
● IMSI
International Mobile Subscriber Identity of the mobile wireless network provider
110
Indicates that the entered PIN is identical with the PN on the SIM card.
The PIN was saved successfully on the device.
Shows that an incorrect PIN was entered or that the SIM card is not plugged in.
Operating Instructions, 09/2017, C79000-G8976-C382-04
RTU3030C

Advertisement

Table of Contents
loading

Table of Contents