Table of Contents
Advertisement
The following data must be configured:
● Active
If the option is activated, the RTU can use the FTP service.
● FTP server name
Name of the FTP server. You will receive the data from your service provider.
● Port number
Port number of the FTP server. You will receive the data from your service provider.
● Interface
Interface for FTP file transfer
● Connection security
Here, select from the following options:
– TLS
– No encryption
● User name
User name required by the FTP server. You will receive the data from your service
provider.
● Password
Password required by the FTP server. You will receive the data from your service
provider.
CA certificate
Here, you have the option of configuring the CA certificate or intermediate certificate of the
FTP server or the individual server certificate of the FTP server.
● Currently used file
Shows the name of the certificate file currently being used by the RTU..
● File used after applying
Shows the name of the last certificate file to be loaded on the RTU (on clicking the"Load
on device" button).
● Load new file
After selecting a certificate file stored on the configuration PC using the "Search button,
the file name is displayed here.
RTU3030C
Operating Instructions, 09/2017, C79000-G8976-C382-04
With this setting only files encrypted with TLS are transferred.
To use TLS a certificate is required.
With TLS the FTP client uses control port 21. The data port is negotiated with the
server.
With this setting the files are transferred unencrypted.
Configuration (WBM)
4.14 Services
123
Advertisement
Table of Contents
