Table of Contents
Advertisement
Configuration (WBM)
4.15 Security
● File used after applying
After loading the file, the name of the loaded file is displayed here.
● Load new file
After selecting a file stored on the configuration PC using the "Search button, the file
name is displayed here.
● Search
Searches the file system of the configuration PC for a key file saved there that is intended
to be loaded on the RTU.
● Load on device
By clicking the button, you download the selected file to the RTU.
Load PEM file
If you want to load the two certificates and the key from the OpenVPN server as a common
PEM file, then enable this option.
● Password
Enter the password specified with the OpenVPN server if you exported the key password-
protected.
● File used after applying
After loading the file, the name of the loaded file is displayed here.
● Load new file
After selecting a file stored on the configuration PC using the "Search button, the file
name is displayed here.
● Search
Searches the file system of the configuration PC for a certificate file saved there that is
intended to be loaded on the RTU.
● Load on device
By clicking the button, you download the selected file to the RTU.
4.15.3
HTTPS
The requirement for using HTTPS via the Internet / mobile wireless network is a publically
accessible IP address of the RTU.
Note
Connections with HTTPS access via the mobile wireless interface
The RTU makes precisely one connection available on the mobile wireless interface. You
should therefore use browsers that also only operate with one connection (Mozilla Firefox,
Apple Safari). With browsers that require at least two connections (e.g. Internet Explorer 11,
Edge, Chrome) no functioning connection will be established or the Web pages will not be
displayed correctly.
130
Operating Instructions, 09/2017, C79000-G8976-C382-04
RTU3030C
Advertisement
Table of Contents
