Table of Contents
Advertisement
Programming
5.6 Blocks for time functions
● Example 3
– Date/time ON: 2015-05-15 12:00:00
– Date/time OFF: 2099-08-31 12:00:00
– "Yearly" enabled
– "Monthly" disabled
– "Pulse" disabled
The settings result in yearly time periods during which the output is set to 1.
● Example 4
– Date/time ON: 2015-08-15 00:00:00
– Date/time OFF: 2099-12-15 00:00:00
– "Yearly" enabled
– "Monthly" enabled
– "Pulse" enabled
The settings result in continuous monthly pulses on the 15th of the month at the time
00:00.
Parameters
Parameters
Input parameters
En
Function parameters
Date/time ON
Date/time OFF
Pulse
Yearly
Monthly
Output parameters
Output
216
Range of values
Description
Enable parameter, see section Often used parameters
(Page 198).
[yyyy-mm-dd hh:mm:
Turn on time
ss]
[yyyy-mm-dd hh:mm:
Turn off time
ss]
ON / OFF
The enabled option only sets pulses at the output instead
of permanently ON.
ON / OFF
Repeats the switching points annually.
ON / OFF
Repeats the switching points monthly.
Tag in which the value calculated by the block is output.
Digital output / bit
•
memory
Operating Instructions, 09/2017, C79000-G8976-C382-04
RTU3030C
Advertisement
Table of Contents
