Starting And Stopping A Spindle Manually - Siemens SINUMERIK 840D sl Operating Manual

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Execution in manual mode

3.2 Selecting a tool and spindle

Starting and stopping a spindle manually

Changing the spindle speed

If you enter the speed in the "Spindle" field while the spindle is rotating, the new speed is

Select the "JOG" operating mode.

Press the "T, S, M" softkey.

Select the desired spindle (e.g. S1) and enter the desired spindle speed

(rpm) in the adjacent input field.

The spindle remains stationary.

If the machine has a gearbox for the spindle, set the gear stage (e.g.

Select a spindle direction of rotation (clockwise or counterclockwise) in

the "Spindle M function" field.

Press the <CYCLE START> key.

The spindle rotates.

Select the "Stop" setting in the "Spindle M function" field.

Press the <CYCLE START> key.

The spindle stops.

Operating Manual, 03/2013, 6FC5398-7CP40-3BA1

Sinumerik 828d