User-Defined Alerts And Readouts; Alert Trigger - Danfoss VLT AutomationDrive FC 302 Programming Manual

Parameter Descriptions
3.13.11 13-9* User-defined Alerts and
Readouts
Parameters in this group allow the configuration of
application-specific messages, warnings, and alarms.
Use the following parameters to configure the frequency
converter to show a message and perform an action when
a specific event occurs:
•
Parameter 13-90 Alert Trigger – the event that
triggers the user-defined action and message.
•
Parameter 13-91 Alert Action – the action that the
frequency converter performs when the event
defined in parameter 13-90 Alert Trigger occurs.
•
Parameter 13-92 Alert Text – the text that the
frequency converter shows in the display when
the event defined in parameter 13-90 Alert Trigger
occurs.
For example, consider the following use case:
If there is an active signal on digital input 32, the
frequency converter shows the message Valve 5 open and
ramps down to a stop.
To achieve this configuration, make the following settings:
•
Parameter 13-90 Alert Trigger = [37] Digital input
DI32.
•
Parameter 13-91 Alert Action = [5] Stop & warning.
•
Parameter 13-92 Alert Text = Valve 5 open.

3.13.12 13-90 Alert Trigger

13-90 Alert Trigger
Array [10]
Select the event that triggers the user-defined action and
message.
Option:
[0] False
*
[1] True
[18] Reversing
[22] Comparator 0
[23] Comparator 1
[24] Comparator 2
[25] Comparator 3
[26] Logic rule 0
[27] Logic rule 1
[28] Logic rule 2
[29] Logic rule 3
[30] SL Time-out 0
[31] SL Time-out 1
[32] SL Time-out 2
[33] Digital input DI18
[34] Digital input DI19
[35] Digital input DI27
[36] Digital input DI29
[37] Digital input DI32
MG33MP02
Programming Guide
13-90 Alert Trigger
Array [10]
Select the event that triggers the user-defined action and
message.
Option:
[38]
[50]
[51]
[60]
[61]
[70]
[71]
[72]
[73]
[74]
13-91 Alert Action
Array [10]
Select the action that the frequency converter performs when
the event defined in parameter 13-90 Alert Trigger occurs.
Option:
[0]
*
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
Function:
[12]
[13]
[14]
13-92 Alert Text
Range:
Size
related
*
13-97 Alert Alarm Word
Range:
0 [0 - 4294967295 ] Shows the alarm word of a user-defined
*
Danfoss A/S © 10/2018 All rights reserved.
Digital input DI33
Comparator 4
Comparator 5
Logic rule 4
Logic rule 5
SL Time-out 3
SL Time-out 4
SL Time-out 5
SL Time-out 6
SL Time-out 7
Info
Warning
Freeze output
Freeze output & warn
Stop
Stop & warning
Jogging
Jogging & warning
Max speed
Max speed & warn
Stop and trip
Stop and trip w manual
reset
Trip
Trip w manual reset
Trip Lock
Function:
[0 - Array [10]
20 ] Enter the text that the frequency
converter shows in the display when the
event defined in parameter 13-90 Alert
Trigger occurs.
Function:
alarm in hex code.
Function:
3 3
Function:
189