Password; Personal Menu Password; Safety Parameters Password; Date And Time/Time Zone Offset - Danfoss VLT AutomationDrive FC 302 Programming Manual

Parameter Descriptions
0-51 Set-up Copy
Option:
[4] Copy to set-
up 4
3 3
[9] Copy to all

3.1.7 0-6* Password

0-60 Main Menu Password
Range:
100 [-9999 -
*
9999 ]
0-61 Access to Main Menu w/o Password
Option:
[0] Full access
*
[1] LCP: Read
only
[2] LCP: No
access
[3] Bus: Read
only
[4] Bus: No
access
[5] All: Read only Read-only function for parameters on LCP,
[6] All: No access No access from LCP, fieldbus, or FC standard
If [0] Full access is selected, parameter 0-60 Main Menu
Password, parameter 0-65 Personal Menu Password, and
parameter 0-66 Access to Personal Menu w/o Password are
ignored.
NOTICE
A more complex password protection is available for
OEMs upon request.

0-65 Personal Menu Password

Range:
200 [-9999 -
*
9999 ]
40
®
VLT
Function:
Copies all parameters in the present
programming set-up (defined in
parameter 0-11 Edit Set-up) to set-up 4.
Copies the parameters in the present set-up
to each of the set-ups 1 to 4.
Function:
Define the password for access to the Main
Menu via the [Main Menu] key. If
parameter 0-61 Access to Main Menu w/o
Password is set to [0] Full access, this
parameter is ignored.
Function:
Disables password defined in
parameter 0-60 Main Menu Password.
Prevent unauthorized editing of Main Menu
parameters.
Prevent unauthorized viewing and editing of
Main Menu parameters.
Read-only functions for parameters on
fieldbus and/or FC standard bus.
No access to parameters is allowed via
fieldbus and/or FC standard bus.
fieldbus, or FC standard bus.
bus is allowed.
Function:
Define the password for access to the Quick
Menu via the [Quick Menu] key. If
parameter 0-66 Access to Personal Menu w/o
Password is set to [0] Full access, this
parameter is ignored.
Danfoss A/S © 10/2018 All rights reserved.
AutomationDrive FC 301/302
0-66 Access to Personal Menu w/o Password
If parameter 0-61 Access to Main Menu w/o Password is set to [0]
Full access, then this parameter is ignored.
Option:
[0] Full access
*
[1] LCP: Read only Prevents unauthorized editing of Quick
[3] Bus: Read only Read-only functions for Quick Menu
[5] All: Read only
0-67 Bus Password Access
Range:
0 [0 - 9999 ] Use this parameter to unlock the frequency
*

0-68 Safety Parameters Password

Range:
300 [0 -
*
9999 ]
0-69 Password Protection of Safety Parameters
Option:
[0]
*
[1]
0-70 Date and Time
Range:
Size [ 0 -
related 0 ]
*
0-73 Time Zone Offset
Range:
0 min [-780 - 780
*
min]
Function:
Disables the password defined in
parameter 0-65 Personal Menu Password.
Menu parameters.
parameters on fieldbus and/or FC standard
bus.
Read-only function for Quick Menu
parameters on LCP, fieldbus, or frequency
converter standard bus.
Function:
converter via fieldbus or MCT 10 Set-up
Software.
Function:
Enter the password for the safety parameters
access. If parameter 0-69 Password Protection of
Safety Parameters is set to [0] Disabled, this
parameter is ignored.
Function:
Disabled
Enabled
Function:
Sets the date and time of the internal clock.
The format to be used is set in
parameter 0-71 Date Format and
parameter 0-72 Time Format.
®
When using the VLT Real-time Clock MCB
117 option, the time is synchronized at 15:00
every day.
Function:
Enter the time zone offset relative to
UTC. This parameter is required for the
automatic daylight saving time
adjustment.
MG33MP02