Configurable Status Word Stw - Danfoss VLT AutomationDrive FC 302 Programming Manual

Parameter Descriptions

8-13 Configurable Status Word STW

This is an array parameter with 16 elements, 1 element for each
bit in range 0–15. Elements 5 and 11–15 are configurable. Each
of the bits can be configured to any of the following options.
Option:
3 3
[2] Alarm 68 Only
[3] Trip excl Alarm 68
[4] Position Tracking
[5] Position Limit
[6] Touch on Target
[7] Touch Activated
[10] T18 DI status
[11] T19 DI status
[12] T27 DI status
[13] T29 DI status
[14] T32 DI status
[15] T33 DI status
[16] T37 DI status
[17] X30/2 DI status
[18] X30/3 DI status
[19] X30/4 DI status
[20] CTW Timeout Toggle
Inverse
[21] Thermal warning
[30] Brake fault (IGBT)
[40] Out of ref range
[49] Derate active
[60] Comparator 0
[61] Comparator 1
[62] Comparator 2
[63] Comparator 3
[64] Comparator 4
[65] Comparator 5
[70] Logic Rule 0
[71] Logic Rule 1
[72] Logic Rule 2
[73] Logic Rule 3
[74] Logic Rule 4
[75] Logic Rule 5
[80] SL digital out A
[81] SL digital out B
[82] SL digital out C
[83] SL digital out D
[84] SL digital out E
[85] SL digital out F
[86] ATEX ETR cur. alarm
[87] ATEX ETR freq. alarm
156
®
VLT AutomationDrive FC 301/302
Function:
The input goes high whenever
alarm 68, Safe Torque Off
activated is active and goes low
whenever alarm 68, Safe Torque
Off activated is not active.
The input goes high whenever
terminal 37 has 0 V and goes
low whenever terminal 37 has
24 V.
Danfoss A/S © 10/2018 All rights reserved.
8-13 Configurable Status Word STW
This is an array parameter with 16 elements, 1 element for each
bit in range 0–15. Elements 5 and 11–15 are configurable. Each
of the bits can be configured to any of the following options.
Option:
[88] ATEX ETR cur. warning
[89] ATEX ETR freq. warning
[90] Safe Function active
[91] Safe Opt. Reset req.
[92] IGBT-cooling
[181] Prev. Maintenance
[200] User Defined Alerts
[231] In Power Lim. Mot.
[232] In Power Lim. Gen.
[233] In Power Limit
8-13 Configurable Status Word STW
Option:
[0] No function
[1] Profile Default
[2] Alarm 68 Only
[3] Trip excl Alarm 68
[10] T18 DI status
[11] T19 DI status
[12] T27 DI status
[13] T29 DI status
[14] T32 DI status
[15] T33 DI status
[16] T37 DI status
[20] CTW Timeout Toggle
Inverse
Function:
See parameter group 5-3* Digital
Outputs.
See parameter group 4-8* Power
Limit. Use this option in motor
mode only.
See parameter group 4-8* Power
Limit. Use this option in
generating mode only.
See parameter group 4-8* Power
Limit. Use this option in both
the motor and the generating
modes.
Function:
NOTICE
Options in this block are
only available for
software version 8.XX.
The input is always low.
Depended on the profile set
in parameter 8-10 Control
Profile.
The input goes high
whenever Alarm 68 is active
and goes low whenever no
alarm 68 is activated
The input goes high
whenever T37 has 0 V and
goes low whenever T37 has
24 V.
MG33MP02