Logging Source; Logging Interval; Trigger Event; Logging Mode - Danfoss VLT AutomationDrive FC 302 Programming Manual

Parameter Descriptions

15-10 Logging Source

Option:
[1628] Angle Error
[1630] DC Link Voltage
[1632] Brake Energy /s
[1633] Brake Energy Average
[1634] Heatsink Temp.
[1635] Inverter Thermal
[1645] Motor Phase U Current
[1646] Motor Phase V Current
[1647] Motor Phase W Current
[1648] Speed Ref. After Ramp [RPM]
[1650] External Reference
[1651] Pulse Reference
[1652] Feedback[Unit]
[1657] Feedback [RPM]
[1660] Digital Input
[1662] Analog Input 53
[1664] Analog Input 54
[1665] Analog Output 42 [mA]
[1666] Digital Output [bin]
[1675] Analog In X30/11
[1676] Analog In X30/12
[1677] Analog Out X30/8 [mA]
[1687] Bus Readout Alarm/Warning
[1689] Configurable Alarm/Warning Word
[1690] Alarm Word
[1692] Warning Word
[1694] Ext. Status Word
[1695] Ext. Status Word 2
[1697] Alarm Word 3
[1698] Warning Word 3
[1843] Analog Out X49/7
[1844] Analog Out X49/9
[1845] Analog Out X49/11
[1860] Digital Input 2
[3110] Bypass Status Word
[3466] SPI Error Counter
[3470] MCO Alarm Word 1
[3471] MCO Alarm Word 2

15-11 Logging Interval

Array [4]
Range:
Size related [ 0.000 - 0.000 ] Enter the interval in ms between
*
MG33MP02
Programming Guide
Function:
This option is only
available for software
version 48.XX
Function:
each sampling of the variables to
be logged.
Danfoss A/S © 10/2018 All rights reserved.

15-12 Trigger Event

Select the trigger event. When the trigger event occurs, a
window is applied to freeze the log. The log then retains a
specified percentage of samples before the occurrence of the
trigger event (parameter 15-14 Samples Before Trigger).
Option:
[0] False
*
[1] True
[2] Running
[3] In range
[4] On reference
[5] Torque limit
[6] Current Limit
[7] Out of current range
[8] Below I low
[9] Above I high
[10] Out of speed range
[11] Below speed low
[12] Above speed high
[13] Out of feedb. range
[14] Below feedb. low
[15] Above feedb. high
[16] Thermal warning
[17] Mains out of range
[18] Reversing
[19] Warning
[20] Alarm (trip)
[21] Alarm (trip lock)
[22] Comparator 0
[23] Comparator 1
[24] Comparator 2
[25] Comparator 3
[26] Logic rule 0
[27] Logic rule 1
[28] Logic rule 2
[29] Logic rule 3
[33] Digital input DI18
[34] Digital input DI19
[35] Digital input DI27
[36] Digital input DI29
[37] Digital input DI32
[38] Digital input DI33
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5

15-13 Logging Mode

Option: Function:
[0] Log always Select [0] Log always for continuous logging.
*
[1] Log once Select [1] Log once on trigger to start and stop
on trigger logging conditionally using
parameter 15-12 Trigger Event and
parameter 15-14 Samples Before Trigger.
3 3
Function:
203