Bus Jog; Parameters: 9-** Profibus; Parameters: 10-** Devicenet Can Fieldbus; Parameters: 12-** Ethernet - Danfoss VLT AutomationDrive FC 302 Programming Manual

Parameter Descriptions
8-82 Slave Messages Rcvd
Range: Function:
0 [0 - 0 ] This parameter shows the number of valid
*
telegrams addressed to the slave sent by the
frequency converter.
8-83 Slave Error Count
Range: Function:
0 [0 - 0 ] This parameter shows the number of error
*
telegrams, which are not executed by the
frequency converter.

3.9.7 8-9* Bus Jog

8-90 Bus Jog 1 Speed
Range:
Size related [ 0 - par. 4-13
*
RPM]
8-91 Bus Jog 2 Speed
Range:
Size related [ 0 - par. 4-13
*
RPM]

3.10 Parameters: 9-** PROFIBUS

For PROFIBUS parameter descriptions, see the VLT
PROFIBUS DP MCA 101 Programming Guide.
3.11 Parameters: 10-** DeviceNet CAN
Fieldbus
For DeviceNet parameter descriptions, see the DeviceNet
Operating Instructions.

3.12 Parameters: 12-** Ethernet

For Ethernet parameter descriptions, see the VLT
EtherNet/IP MCA 121 Operating Instructions.
MG33MP02
Programming Guide
Function:
Enter the jog speed. Activate this
fixed jog speed via the serial port
or fieldbus option.
Function:
Enter the jog speed. Activate this
fixed jog speed via the serial port
or fieldbus option.
®
®
Danfoss A/S © 10/2018 All rights reserved.
3 3
165