Dst/Summertime; Clock Fault; Working Days; Additional Non-Working Days - Danfoss VLT AutomationDrive FC 302 Programming Manual

Parameter Descriptions

0-74 DST/Summertime

Option: Function:
Select how to handle daylight saving time/summer
time. For manual setting of DST/summer time,
enter the start date and end date in
parameter 0-76 DST/Summertime Start and
parameter 0-77 DST/Summertime End.
[0] Off
*
[2] Manual
0-76 DST/Summertime Start
Range: Function:
Size [ 0 - 0 ] Sets the date and time when DST/
related summer time starts. The date is
*
programmed in the format selected in
parameter 0-71 Date Format.
0-77 DST/Summertime End
Range: Function:
Size [ 0 - 0 ] Sets the date and time when DST/
related summer time ends. The date is
*
programmed in the format selected in
parameter 0-71 Date Format.

0-79 Clock Fault

Option: Function:
Enables or disables the clock warning when the
clock has not been set, or has been reset due to a
power-down and no back-up is installed. If VLT
Analog I/O Option MCB 109 is installed, [1] Enabled
is default.
[0] Disabled
[1] Enabled

0-81 Working Days

Array [7]
Array with 7 elements [0]–[6] shown below the parameter
number in the display. Press [OK] and step between elements
▲ ▼
with [ ] and [ ].
Option: Function:
Set for each weekday if it is a working day or a non-
working day. First element of the array is Monday. The
working days are used for timed actions.
[0] No
[1] Yes
MG33MP02
Programming Guide
0-82 Additional Working Days
Array [5]
Array with 5 elements [0]–[4] shown below the parameter
number in the display. Press [OK] and step between elements
▲
with [
Range:
Size related

0-83 Additional Non-Working Days

Array [15]
Array with 15 elements [0]–[14] shown below the parameter
number in the display. Press [OK] and step between elements
▲
with [
Range:
Size related
0-84 Time for Fieldbus
Range:
0 [0 - 4294967295 ]
*
0-85 Summer Time Start for Fieldbus
Range:
®
0 [0 - 4294967295 ] Shows the summer time start for
*
0-86 Summer Time End for Fieldbus
Range:
0 [0 - 4294967295 ] Shows the summer time end for fieldbus.
*
0-89 Date and Time Readout
Range:
0 [0 - 25 ] Shows the current date and time. The date and
*
Danfoss A/S © 10/2018 All rights reserved.
▼
] and [ ].
Function:
[ 0 - 0 ] Defines dates for additional working days
*
that would normally be non-working
days according to parameter 0-81 Working
Days.
▼
] and [ ].
Function:
[ 0 - 0 ] Defines dates for additional working days
*
that would normally be non-working
days according to parameter 0-81 Working
Days.
Function:
Shows the time for fieldbus.
Function:
fieldbus.
Function:
Function:
time is updated continuously.
The clock does not begin counting until a setting
different from default has been made in
parameter 0-70 Date and Time.
3 3
41