User Interface; Local Control Panel; Lcp Layout - Danfoss VLT AutomationDrive FC 302 Operating Instructions Manual

User Interface

5 User Interface

5.1 Local Control Panel

The local control panel (LCP) is the combined display and
keypad on the front of the unit. The LCP is the user
interface to the frequency converter.
The LCP has several user functions.
5 5
•
Start, stop, and control speed when in local
control
•
Display operational data, status, warnings and
cautions
•
Programming frequency converter functions
•
Manually reset the frequency converter after a
fault when auto-reset is inactive
An optional numeric LCP (NLCP) is also available. The NLCP
operates in a manner similar to the LCP. See the
Programming Guide, for details on use of the NLCP.
40
Operating Instructions

5.1.1 LCP Layout

The LCP is divided into 4 functional groups (see
Illustration 5.1).
a
b
c
d
Danfoss A/S © Rev. 2014-02-20 All rights reserved.
Status
1234rpm
1.0 A
43,5Hz
a
Run OK
Quick
b
Status
Menu
c On OK
Warn.
Alarm
Hand
d
O
on
Illustration 5.1 LCP
Display area.
Display menu keys for changing the display to show
status options, programming, or error message
history.
Navigation keys for programming functions, moving
the display cursor, and speed control in local
operation. The status indicator lights are also in this
group.
Operational mode keys and reset.
Table 5.1 Legend to Illustration 5.1
1(1)
43,5Hz
Alarm
Main
Log
Menu
Auto
Reset
on
MG34U302