States - Danfoss VLT AutomationDrive FC 302 Programming Manual

Parameter Descriptions
13-44 Logic Rule Boolean 3
Array [6]
Option:
[222] Homing Ok
3 3
[223] On Target
[224] Position Error
[225] Position Limit
[226] Touch on Target
[227] Touch Activated
184
®
VLT AutomationDrive FC 301/302
Function:
NOTICE
This option is available only with
software version 48.20 and
newer.
Homing is completed with the
selected homing function
(parameter 17-80 Homing Function).
NOTICE
This option is available only with
software version 48.20 and
newer.
Positioning is completed and the on-
target signal is sent when the actual
position is within parameter 3-05 On
Reference Window for the duration of
parameter 3-09 On Target Time and the
actual speed does not exceed
parameter 3-05 On Reference Window.
NOTICE
This option is available only with
software version 48.20 and
newer.
The position error exceeds the value
in parameter 4-71 Maximum Position
Error for the time set in
parameter 4-72 Position Error Timeout.
NOTICE
This option is available only with
software version 48.20 and
newer.
The position is outside the limits set
in parameter 3-06 Minimum Position
and parameter 3-07 Maximum Position.
NOTICE
This option is available only with
software version 48.20 and
newer.
Target position is reached in touch
probe position mode.
NOTICE
This option is available only with
software version 48.20 and
newer.
Danfoss A/S © 10/2018 All rights reserved.
13-44 Logic Rule Boolean 3
Array [6]
Option: Function:
Touch probe positioning active. The
frequency converter monitors the
touch probe sensor input.

3.13.10 13-5* States

13-51 SL Controller Event
Option: Function:
[0] False Select the boolean input (true or false)
to define the smart logic controller
event. See parameter 13-01 Start Event
(options [0] False–[61] Logic rule 5) and
parameter 13-02 Stop Event (options
[70] SL Time-out 3–[74] SL Time-out 7)
for more information.
[1] True
[2] Running
[3] In range
[4] On reference
[5] Torque limit
[6] Current Limit
[7] Out of current
range
[8] Below I low
[9] Above I high
[10] Out of speed
range
[11] Below speed low
[12] Above speed high
[13] Out of feedb.
range
[14] Below feedb. low
[15] Above feedb. high
[16] Thermal warning
[17] Mains out of range
[18] Reversing
[19] Warning
[20] Alarm (trip)
[21] Alarm (trip lock)
[22] Comparator 0
[23] Comparator 1
[24] Comparator 2
[25] Comparator 3
[26] Logic rule 0
[27] Logic rule 1
[28] Logic rule 2
[29] Logic rule 3
[30] SL Time-out 0
[31] SL Time-out 1
[32] SL Time-out 2
MG33MP02