Operations; Checking The Board Configuration - Sony DVS-7300 User Manual

Operations

This section describes the operations carried out from the DIAGNOSIS
menu.

Checking the Board Configuration

Checking the configuration of the boards installed in the switcher
In the DIAGNOSIS menu, select item 1 (SWER PROC), then press F3
(BOARD CONFIG).
The board configuration appears in the menu display.
Checking the configuration of the boards installed in the DMK-
7000
In the DIAGNOSIS menu, select item 2 (DMK PROC), then press F3
(BOARD CONFIG).
The board configuration appears in the menu display.
Chapter 15 DIAGNOSIS Menu Operations
15-3