Enhanced Chroma Keying (Single Mode)
5
6
5-28
Chapter 5 Chroma Keying
Adjust the color cancel key parameters.
Knob
Parameter
1
Clip
2
Gain
Press any of F4 to F6 as necessary and adjust the parameters.
F4 (WINDOW): Adjust the detection range for the key signal.
Knob
Parameter
1
Crop
2
Angle
F5 (POS): Adjust the color cancel key edge position.
Knob
Parameter
1
Left Pos
2
Right Pos
3
H Phase
F6 (Y BAL): Adjust the degree to which a Y balance is added to the
color cancel key.
Knob
Parameter
1
Mixtur
Setting
Set clip level on the color cancel key signal (0.00 to
100.00)
Set color cancel key gain (0.00 to 100.00)
Setting
Set the CROP value (see page 5-10) (0.00 to
100.00)
Set the ANGLE value (see page 5-10) (0.00 to
180.00)
Setting
Set position of key left edge (–3.00 to +3.00)
Set position of key right edge (–3.00 to +3.00)
Move the key
Setting
Proportion of Y balance key (0.00 to 100.00)