Sony DVS-7300 User Manual page 251

3
Adjust the parameter settings as necessary.
When you selected border or soft border in step 2, when F6 (MATTE) is
on (a color matte is selected as the edge fill), you can adjust the
parameters for matte 1 regardless of whether the color mix function is on
or off.
When applying a border:
Knob Parameter
1 Luminance
2 Saturation
3 Hue
4 Width
When applying a soft edge:
Knob Parameter
1 Softness
When applying a soft border:
Knob Parameter
1 Luminance
2 Saturation
3 Hue
4 Width
1 Inner Soft
2 Outer Soft
4 Width
4
Press F5 or F6 to select the edge fill signal.
F5 (UTILITY BUS): signal selected on the utility bus.
To select the signal on the M/E utility bus, press the M/E UTIL
button in the auxiliary delegation section, and select the cross-point
button assigned to the required signal.
F6 (MATTE): dedicated color matte for edge fill.
Setting
Set luminance (0.00 to 100.00)
Set saturation (0.00 to 100.00)
Set hue (0.00 to 359.99)
Set width (0.00 to 100.00)
Setting
Set the degree of edge softness (0.00 to 100.00)
Setting
Set luminance (0.00 to 100.00)
Set saturation (0.00 to 100.00)
Set hue (0.00 to 359.99)
Set width (0.00 to 100.00)
Inner edge softness of the border (0.00 to 100.00)
Outer edge softness of the border (0.00 to 100.00)
Set width (0.00 to 100.00)
Chapter 4 Basic Operations for Image Creation
(Continued)
4-167