Sony DVS-7300 User Manual page 332

Snapshot Operations
Recalling an M/E snapshot
To recall an M/E snapshot using the FlexiPad, use the following procedure.
1
2
3
7-12
Chapter 7 Snapshots
Press the SNAPSHOT button in the FlexiPad of the M/E bank
concerned.
To apply the "XPT DISABLE" attribute press the XPT DSBL button in
the FlexiPad, turning it on, and to apply the "KEY DISABLE" attribute
press the KEY DSBL button, turning it on.
Use the following method to select the number of the register from which
you wish to recall the snapshot.
1) If the tens digit of the number currently displayed is different from
the tens digit of the register number you wish to enter, press the
SHIFT button, turning it on, and press the tens digit using the
numeric keypad.
The number you have entered appears in the tens digit of the display,
and the units digit appears blank.
2) Press the units digit of the required register number.
When you press the units digit, the numeric button lights green, and
the specified snapshot is recalled, restoring the relevant sections of
the control panel to their states when the snapshot was saved. If the
snapshot has attributes applied, the corresponding attribute buttons in
the FlexiPad (AUTO TRANS and EFF DISS) light.