Sony DVS-7300 User Manual page 540

Setup Relating to Operations From the Control Panel
(OPERATION Menu)
Adjusting the trackball and Z-ring (TRACK BALL menu)
14-84
Chapter 14 Setup
This menu adjusts various functions of the trackball and Z-ring on the
BKDS-7031 DME Control Panel Unit.
Selecting the speed of image movement
This selects the speed of movement of the image under trackball and Z-ring
control. Use the follwing procedure.
1
In the OPERATION menu press F8 (TRACK BALL).
The TRACK BALL menu appears.
3D
MOVEMNT
X1
F1 F2 F3
2
Press F3 (3D MOVEMENT) to change the setting.
Pressing F3 cycles through the following three settings:
×1: Standard speed
×2: Double speed
×4: Quadruple speed
Selecting the fineness of image movement produced by the
MENU, SRCE, or TRGT button
There are three options for the degree of fineness of control provided by
holding down the MENU, SRCE, or TRGT button during a trackball or Z-
ring operation, selected by pressing F5 (FINE MODE) as follows.
/2: 1/2 of speed when the button is not held down
/4: 1/4 of speed when the button is not held down
/8: 1/8 of speed when the button is not held down
VELOCTY
FINE
HOLD
MODE
X1
/2
F4 F5 F6 F7
TRACK BALL menu
XY MOVE
SNSTVTY
CONST
F8 F9 F10