Sony DVS-7300 User Manual page 168

Keys
4
5
4-84
Chapter 4 Basic Operations for Image Creation
When using the outline function:
Knob Parameter
1 Width
4 Density
To adjust separately the width of the top, bottom, left and right sides of
the edge, press F8 (SEP EDGE), turning it on, and adjust the parameters.
Knob Parameter
1 Top
2 Left
3 Right
4 Bottom
4 Density
To soften the edge, press F7 (SOFT EDGE), turning it on, and adjust the
degree of softness.
Knob Parameter
1 Softness
Note
When you select a normal (unmodified) edge, the edge softening
function is not available.
To adjust the color matte, press F10 (MATTE ADJUST).
The EDGE MATTE menu appears.
MATTE
FLAT MIX
4H
F1 F2 F3
Function key indications in the EDGE MATTE menu (when F1 is selected)
Setting
Set width (0 to 4)
Set density (0.00 to 100.00)
Setting
Top edge width (0.00 to 4.00)
Left edge width (0.00 to 4.00)
Right edge width (0.00 to 4.00)
Bottom edge width (0.00 to 4.00)
Set density (0.00 to 100.00)
Setting
Set the degree of edge softness (0.00 to 100.00)
F4 F5 F6 F7 F8 F9 F10