Sony DVS-7300 User Manual page 548

Setup Relating to Operations From the Control Panel
(OPERATION Menu)
14-92
Chapter 14 Setup
To assign VTR control data to buttons
Use the following procedure.
1
If in the SHOTBOX menu "VTR" is not selected, press the cursor
movement button (,) to select it.
The menu appears as follows.
VTR
BUTTON
No. 1 2
#2
F1 F2 F3
Function key indications in the SHOTBOX menu (with "VTR" selected)
2
Press F1 (BUTTON No.), or turn control knob 2 to align the cursor with
the number of the button to be assigned.
3
To assign the register storing VTR1 or VTR2 control data, press F2
(VTR1) or F3 (VTR2), then enter the register number with the numeric
keypad.
Repeat steps 2 and 3 as required, to assign the buttons.
F4 F5 F6 F7 F8 F9 F10