Sony DVS-7300 User Manual page 425

Digital video switcher system. i/o expansion system
Hide thumbs Also See for DVS-7300:
Table of Contents

Advertisement

Functions which can be controlled from the tablet
You can use the tablet for the following purposes.
• As the wipe positioner for the wipe generator currently selected in the wipe
control block.
Note
In this case, the entire tablet area corresponds to the positioner range, and
the absolute stylus position is input as the data value. Therefore when you
switch the wipe generator selection, the pattern on the newly selected wipe
generator jumps instantaneously to the position corresponding to the stylus
position.
• When you have selected item 2 (PAINT) in the FRAME MEMORY 1 or
FRAME MEMORY 2 menu, the pressure switch on the end of the stylus
toggles F1 (PAINT) on and off.
Controlling the positioner function with the tablet
To assign the tablet to the positioner function for a particular menu, use the
following procedure.
1
In the MISC menu, select item 1 (ENABLE).
2
Set F10 (TABLET) to "ON".
3
Display the menu whose positioner function you wish to use.
4
Press the MENU button in the DME control panel unit, turning it on.
The MENU button lights amber, and the tablet can now be used for the
positioner function.
In this state, changing the menu ends this assignment, but it is possible to
keep the tablet assigned to the positioner function by the following
method.
Assigning the tablet permanently to the positioner function
In step 4 above, press the MENU button twice in rapid succession, lighting it
green.
In this state, switching to another menu leaves the tablet assigned to the
positioner function for the menu selected in step 3.
Chapter 12 MISC Menu Operations
12-7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvs-7350

Table of Contents