Sony DVS-7300 User Manual page 25

Switch S2
Bit No
1(REMOTE1 BAUD)
2(P/S)
3(SYNC/ASYNC)
4(REMOTE3 BAUD)
5(TABLE DATA SIZE)
6
7
8(DEBUG MODE)
Switch S5 (TEST): 0
Terminal setting initialization
After making the above switch settings, be sure to carry out the following
procedure.
If a backup CPU board is installed, carry this out with one CPU board
removed, and carry out the same procedure for each of the CPU boards.
1
Set the rotary switch S5 (TEST) on the CPU board to the D position.
2
Press the RESET button, to initialize the settings.
3
Return the rotary switch S5 (TEST) on the CPU board to the 0 position.
Once the procedure has been completed for both boards, reinstall the boards
as originally.
Setting
0(CLOSE:312Kbps)
0(CLOSE:S)
0(CLOSE:SYNC)
0(CLOSE:38.4Kbps)
0(CLOSE:128bytes)
0(CLOSE)
0(CLOSE
0(CLOSE:NORMAL)
1-15
Chapter 1 Overview