Sony DVS-7300 User Manual page 503

Carrying out setup relating to auxiliary bus control from an
RS-422A port of the switcher (AUX CONTROL menu)
You can use the AUX CONTROL menu for the following settings.
• Setting the control function for bus control from an RS-422A port: For
the control of the bus outputs from each of the following switcher ports,
select ENBL (control enabled), DSBL (control disabled) or MANUAL
(status determined by the ENABLE menu setting (see page 12-4)).
PANEL 1, DME 1 to DME 4, EDITOR A/REMOTE 1, EDITOR B/
REMOTE 2, PANEL 2/REMOTE 3
• Selecting the function setting for recalling auxiliary bus settings when
executing a key frame or snapshot: Select whether when executing a key
frame or snapshot to recall the saved auxiliary bus settings (ENBL) or
keep the current settings unchanged (DSBL).
To carry out these settings, use the following procedure.
1
In the PERIPH menu, press F4 (AUX CTRL).
The AUX CONTROL menu appears.
BUS
SELECT
#2
F1
2
Press F1 (BUS SELECT) or turn control knob 2 to move the cursor and
select the bus to which the settings apply from buses AUX 1 to AUX 28,
the edit preview (EDIT PVW) bus, or the routing switcher buses (EXT 1
to EXT 36) controlled by the switcher.
PANEL1 DME1 DME2 DME3
ENBL MAN MAN
F2 F3 F4
Function key indications in the AUX CONTROL menu
DME4 EDIT A EDIT B
MAN MAN MAN MAN
F5 F6 F7 F8
KF/
PANEL2 SS
ENBL ENBL
F9 F10
(Continued)
14-47
Chapter 14 Setup