Sony DVS-7300 User Manual page 385

Assigning a name to a register
Use the following procedure to assign a name to a register.
1
In the REGISTER menu, select either of the following items, depending
on the type of register you wish to name.
Item 1 (EFFECT): key frame effect registers
Item 2 (SNAPSHOT): snapshot registers
Depending on the item you select, the EFFECT or SNAPSHOT menu
appears.
2
Press F5 (NAME), turning it on.
Function key indications for F7 to F10 now appear.
3
Press one of F7 to F9 to select whether to apply a name to one or more
registers.
F7 (ALL): Apply the same name to all registers.
F8 (BLOCK): Apply a name to a block of contiguous registers.
F9 (ONE): Apply a name to a single register.
• If you pressed F7 (ALL), proceed to step 5.
• If you pressed F8 (BLOCK) or F9 (ONE), the register number input
position switches to reverse video. In this case continue to step 4.
4
Enter the number of the register to which you wish to assign a name,
using the numeric keypad.
If in step 3 you pressed F8 (BLOCK), enter the first and last registers in
the block of registers to which you wish to apply the name.
5
Press F10 (EXEC).
The function key indications change, and a text input screen appears.
(Continued)
9-11
Chapter 9 Registers