(Periph Menu) - Sony DVS-7300 User Manual

Digital video switcher system. i/o expansion system
Hide thumbs Also See for DVS-7300:
Table of Contents

Advertisement

Setup Relating to Interfaces With Peripheral Devices

(PERIPH Menu)

Selecting the type of device connected to an RS-422A port of
the switcher (PORT ASSIGN menu)
14-46
Chapter 14 Setup
You can use the PORT ASSIGN menu to select the type of device connected
to an RS-422A port of the switcher.
Select the type of device from the following.
• When the port is EDITOR A/REMOTE 1: editor A or the remote control
panel.
• When the port is EDITOR B/REMOTE 2: editor B or the remote control
panel.
To carry out these settings, use the following procedure.
1
In the PERIPH menu, press F3 (PORT ASSIGN).
The PORT ASSIGN menu appears.
PORT
SELECT
#2
F1
F2
F3
Function key indications in the PORT ASSIGN menu
2
Press F2 (PORT SELECT) or turn control knob 2 to move the cursor and
select EDITOR A/REMOTE 1 or EDITOR B/REMOTE 2 as the port to
which the setting applies.
3
Press F7 (PERIPH SELECT) to move the cursor and select the connected
device.
4
Press F5 (SELECT) to confirm the selection.
PERIPH
SELECT
SELECT
F4
F5
F6
F7
#3
F8
F9
F10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvs-7350

Table of Contents