Sony DVS-7300 User Manual page 45

DME 2: The transition will be a wipe-like
effect, using the effects provided by
DME channel 2. This requires at least
two DME-7000 or other DME units to
be connected to the switcher system.
To carry out a dual DME wipe using
the effects provided by two DME
channels, press this button and the
DME 1 button simultaneously, turning
them on.
5 Auto transition control section
Duration display: This shows the
number of frames in the transition
duration. You can set the duration
using the numeric keypad.
AUTO TRANS button: Pressing this
button carries out an auto transition of
the set duration. The transition starts
immediately, and the button lights
amber. When the transition
completes, the button goes off.
While a transition is in progress (i.e.
while the button is lit amber), pressing
the AUTO TRANS button again
pauses the transition, and the AUTO
TRANS button then lights green.
Pressing the button again in this state
resumes the transition, and the AUTO
TRANS button reverts to amber.
CUT button: Pressing this button carries
out the transition as a cut (i.e.
instantaneously).
6 Transition indicator
This comprises 30 LEDs which show the
current status of the transition.
7 Fader lever
This is used to carry out a manual
transition.
Chapter 2 Location and Function of Parts
2-13