Sony DVS-7300 User Manual page 197

Changing the aspect ratio of the wipe pattern
Replicating the wipe pattern
Rotating the wipe pattern
Applying a modulation to the edge of the wipe pattern
To apply these modifiers, use the following procedure.
Applying modulation requires the optional BKDS-2070 Enhanced Wipe
Option
Generator Board to be installed.
1
• To apply the modifiers to the main pattern, in the M/E-1 WIPE menu,
select F4 (MAIN MODIFY).
• To apply the modifiers to the subsidiary pattern, in the M/E-1 WIPE
menu, select F5 (SUB MODIFY).
The MODIFY menu appears.
ASPECT
OFF
F1
2
Depending on the modifiers you wish to apply, press any of F1 through
F8, turning them on, and adjust the parameters.
F1 (ASPECT): adjust the pattern aspect ratio.
Knob
1
F2 (MULTI): use replicated patterns.
Knob
1
2
3
a) For the layout codes (1 to 4) see page 4-101.
F3 (OFF): do not apply any of the rotation modifiers (ANGLE, SPEED,
or MAGNITUDE).
ROTATION
MULTI1 OFF ANGLE
SPEED
OFF
F2 F3 F4
Function key indications in the MODIFY menu
Parameter Setting
Aspect Aspect ratio (0.00 to 100.00)
Parameter Setting
H Multi Number of pattern replications horizontally (1 to 63)
V Multi Number of pattern replications vertically (1 to 63)
Shift Replication layout (1 to 4)
Chapter 4 Basic Operations for Image Creation
V
H
MAG MOD MOD
OFF OFF
F5 F6 F7 F8
a)
F9 F10
(Continued)
4-113