Color Correction
12-16
Chapter 12 MISC Menu Operations
To partly mask primary color correction
Use the following procedure.
1
In the PRIMARY COLOR CORRECTION menu, press F9 (PRIMARY
MASK), turning it on.
2
Press F10 (MASK).
The COLOR CORRECTION MASK menu appears.
LUM PROC
PRIMARY
SECOND
MASK
MASK
MASK
ON
OFF
OFF
F1
F2
F3
Function key indications in the COLOR CORRECTION MASK menu
3
Press F4 (BOX) or F5 (PATTERN) to select the required mask source.
F4 (BOX): Signal generated by a dedicated box generator
F5 (PATTERN): Signal generated by a dedicated pattern generator
4
Set the mask source parameters.
When you selected F4 (BOX):
Knob
Parameter
1
Top
2
Left
3
Right
4
Bottom
1
Softness
MASK SOURCE
BOX
PATTERN
MODIFY
F4
F5
F6
Setting
Top edge position/0.00 to 100.00
Left edge position/0.00 to 100.00
Right edge position/0.00 to 100.00
Bottom edge position/0.00 to 100.00
Degree of edge softness/0.00 to 100.00
MASK
INVERT
OFF
F7
F8
F9
F10