Sony DVS-7300 User Manual page 140

Keys
4
4-56
Chapter 4 Basic Operations for Image Creation
When applying a drop border or shadow:
Knob Parameter
1 Width
2 Position
4 Density
1 Luminance
2 Saturation
3 Hue
4 Density
a) For the details of "4H DROP ON" and "4H DROP OFF" modes, see "Edge types and
key fill/key source positions" (page 4-58).
b) You can adjust the edge position continuously.
When using the outline function:
Knob Parameter
1 Width
4 Density
To adjust separately the width of the top, bottom, left and right sides of
the edge, press F6 (SEP EDGE), turning it on, and adjust the parameters.
Knob Parameter
1 Top
2 Left
3 Right
4 Bottom
4 Density
Press F8 or F9 to select the edge fill signal.
F8 (UTILITY BUS): signal selected on the utility bus (common to M/E-
1 through M/E-3).
To select the signal on the M/E utility bus, press the M/E UTIL
button in the auxiliary delegation section, and select the cross-point
button assigned to the required signal.
F9 (MATTE): dedicated color matte for edge fill.
When you selected F8, after selecting the signal go to step 5.
Setting
Set edge width (in "4H DROP ON"
a)
"4H DROP OFF" mode: 0 to 8)
Set edge position (in "4H DROP ON "
b)
359 ; in "4H DROP OFF"
Set density (0.00 to 100.00)
Set luminance (0.00 to 100.00)
Set saturation (0.00 to 100.00)
Set hue (0.00 to 359.99)
Set density (0.00 to 100.00)
Setting
Set width (0 to 4)
Set density (0.00 to 100.00)
Setting
Top edge width (0.00 to 4.00)
Left edge width (0.00 to 4.00)
Right edge width (0.00 to 4.00)
Bottom edge width (0.00 to 4.00)
Set density (0.00 to 100.00)
a) mode: 0 to 4; in
a) mode: 0 to
a) b)
mode: 180 to 359 )