11
When you are ready to freeze the frame, press F1 (FREEZE).
This writes the freeze frame to memory.
Outputting the stored frame only
To output the frame currently stored in frame memory to a monitor, for
example, use the following procedure.
1
In the FRAME MEMORY 1 menu, select item 1 (MANUAL).
2
Set F2 (OUTPUT SELECT) to "MEM".
Making the stored frame black
To clear the current contents of frame memory to black, press F3 (MEMORY
CLEAR).
This function operates not only in manual mode, but also in paint mode, in
the same way.
Chapter 6 Frame Memory
6-11