Sony DVS-7300 User Manual page 446

Color Correction
12-28
Chapter 12 MISC Menu Operations
To copy or swap primary color correction data
Use the following procedure.
1
In the COLOR CORRECTION menu, press F2 (COPY).
The COLOR CORRECTION COPY menu appears.
LAST X SOURCE
#2
F1 F2 F3
Function key indications in the COLOR CORRECTION COPY menu
2
Press F2 (SOURCE) or turn control knob 2 to align the cursor on the
"FROM" side with the copy/swap source channel.
When the "FROM" channel is selected, the "TO" channel is selected
automatically. (You may select the "TO" channel first; then the "FROM"
channel will be selected automatically.)
3
Press F4 (STAGE) or turn control knob 3 to align the cursor with an item
to copy or swap, then press F5 (SELECT).
Repeat this until all items to copy or swap have been selected.
4
To carry out a swap, press F8 (SWAP); to carry out a copy, press F10
(COPY).
This carries out the swap or copy.
To restore the state before a copy or swap
Press F1 (LAST X).
FROM
STAGE SELECT
#2
F4 F5 F6
EXEC
TO SWAP COPY
#3
F7 F8 F9 F10