Run Mode Settings - Sony DVS-7300 User Manual

Executing and Saving Effects
Setting a pause point
Use the following procedure.
1
2
Canceling the pause setting
Stop the effect at the pause point, then in the KEY FRAME menu, press F5
(PAUSE).
The function key indication reverts to normal video, and the pause point
setting is canceled.

Run Mode Settings

To execute the same effect repeatedly, use the following procedure.
1
2
8-28
Chapter 8 Key Frame Effects
Stop the effect at the desired pause point.
In the KEY FRAME menu, press F5 (PAUSE).
The function key indication switches to reverse video, and the current
position of the current effect is set as the pause point.
Thereafter, if you execute this effect by using the RUN button, it pauses
at the set point.
In the KEY FRAME menu, press F4 (RUN MODE).
The RUN MODE menu appears.
RUN MODE
XPT END
LOOP TIME
DSBL
OFF OFF SAME
F1 F2 F3
Function key indications in the RUN MODE menu
Set F2 (LOOP) to "ON".
F4 F5 F6 F7
KF
FADER
ENBL
F8 F9 F10