4
Set the following parameters.
When you selected F4 (LUM):
Knob
1
2
When you selected F5 (CHROMA):
Knob
1
2
3
4
To reset the parameters
Holding down the SHIFT button (the function display for F2 changes to
"UNITY"), press F2 (UNITY).
Copying/Swapping Color Correction Data
It is possible to copy color correction data set on a channel to the other
channel, or to swap color correction data between the two channels.
Note
In color correction copy operations, only the adjustment parameters are
copied. Such settings as effect on/off settings and mask settings are not
copied.
Parameter
Setting
Dark
Dark clip value/–6.85 to +109.13
White
White clip value/–6.85 to +109.13
Parameter
Setting
U Nega
Negative clip value for the U signal/–111.39 to
+111.39
U Posi
Positive clip value for the U signal/–111.39 to
+111.39
V Nega
Negative clip value for the V signal/–111.39 to
+111.39
V Posi
Positive clip value for the V signal/–111.39 to
+111.39
Chapter 12 MISC Menu Operations
12-27