Sony DVS-7300 User Manual page 546

Setup Relating to Operations From the Control Panel
(OPERATION Menu)
14-90
Chapter 14 Setup
To assign switcher registers to buttons
Use the following procedure.
1
In the OPERATION menu, press F10 (SHOTBOX).
The SHOTBOX menu appears.
2
If in the screen "SWITCHER" is not selected, press the cursor movement
button (<) to select it.
The menu appears as follows.
RECALL REGS
BUTTON S. S EFF
No.
No. No.
#2
F1 F2 F3
Function key indications in the SHOTBOX menu (with "SWITCHER" selected)
3
Press F1 (BUTTON No.) or turn control knob 2 to align the cursor with
the number of the button to be assigned.
4
• To assign a snapshot register, press F2 (S.S No.), then enter the register
number with the numeric keypad.
• To assign a key frame effect register, press F3 (EFF No.), then enter the
register number with the numeric keypad.
5
If in step 4 you selected a snapshot register, press F4 (M/E-1) to F8
(USER) to select the sub-registers used.
When a key frame effect register is selected, the object of the selection is
not the recall, but the execution after the recall.
Repeat steps 3 to 5 as required, to assign the buttons.
REGION
P/P
M/E-1 M/.E-2 M/E-3 DSK
F4 F5 F6 F7
RECALL
USER MODE RECALL
RECALL
F8 F9 F10