Sony DVS-7300 User Manual page 199

Resetting all of the wipe modifiers to the default settings
It is possible to reset all of the wipe modifiers for the currently selected wipe
pattern to the default settings.
For example, to do this for the wipe pattern selected on the M/E-1 bank, in
the menu control section, hold down the WIPE top menu button in the M/E-1
group for about two or three seconds.
You can determine the default settings using a setup menu operation.
For more information about the default settings, see the section on the
BACKUP menu (page 14-15).
Wipe snapshot operations
When you have finalized a wipe pattern, complete with its various
modifications, you can save the whole setting using a numeric key in the
FlexiPad, for instant recall when required.
To save a wipe snapshot
For example, to save the wipe settings on the M/E-1 bank, hold down the
WIPE button in the FlexiPad of the M/E-1 bank and press one of the numeric
keys 1 to 9 which is not lit.
This saves the data in the register corresponding to the number of the numeric
key which you have pressed.
Note
When a numeric key is lit, there is a wipe snapshot already stored in the
corresponding register. If you hold down the WIPE button and press one of
the numeric keys which is lit, the contents of the register are overwritten.
To recall a wipe snapshot
In the FlexiPad, press the WIPE button, turning it on, then press the numeric
key corresponding to the required register (the key will be lit).
To return to the state immediately before recalling a wipe
snapshot ("LAST X" function)
In the FlexiPad, press the WIPE button, turning it on, then press the numeric
0 key.
Chapter 4 Basic Operations for Image Creation
4-115