Sony DVS-7300 User Manual page 532

Setup Relating to Operations From the Control Panel
(OPERATION Menu)
Making settings relating to control panel operation, screen
saver and fade-to-black function (PANEL ENABLE menu)
14-76
Chapter 14 Setup
You can use the PANEL ENABLE menu for the following settings.
• Setting the screen saver delay time: Select the delay time until the screen
saver comes into operation after the last control panel operation. The
settings are: OFF (no screen saver function), 1, 3, 5, or 10 minutes.
• Selecting the control over M/E banks and PGM/PST bank given to the
control panel: Select the control given to the control panel over each of
the M/E banks individually.
INHBT: Control is disabled. The display functions of the particular
bank also do not operate.
DSBL: Control is disabled. The display functions of the particular bank,
however, do operate.
ENBL: Control is enabled. The display functions of the particular bank
also operate.
• Setting the fade-to-black function on the DMK-7000: Select whether to
enable (ENBL) or disable (DSBL) the fade-to-black function on each of
the keyer outputs from the DMK-7000.
The fade-to-black is carried out simultaneously on all keyers for which it
is enabled.
To carry out these settings, use the following procedure.
1
In the OPERATION menu, press F6 (PANEL ENABLE).
The PANEL ENABLE menu appears.
SCREEN
M/E-1
SAVER
OFF ENBL
F1 F2 F3
Function key indications in the PANEL ENABLE menu
M/E CONTROL
DSK 1
M/E-2 M/E-3 P/P
ENBL ENBL ENBL
F4 F5 F6
FADE TO BLACK
DSK 2 DSK 3 DSK 4
DSBL
DSBL DSBL ENBL
F7 F8 F9 F10