Manipulating Snapshot And Key Frame Effect Registers - Sony DVS-7300 User Manual

Manipulating Snapshot and Key Frame Effect Registers

This section describes how to manipulate snapshot and key frame effect
registers, and how to apply a name to a register.
Selecting the channels to which operations apply
When manipulating registers, with the EFF button or SNAPSHOT button in
the numeric keypad section lit, it is necessary to press the sub-register
selection buttons, and select the channels to which the manipulations apply.
However, for the switcher it is not possible to carry out operations on
individual sub-registers. If one or more of the five buttons (M/E 1, M/E 2,
M/E 3, P/P DSK, and USER) is lit, all of switcher registers are selected.
The following operations assume that the objects to which the manipulations
apply have already been selected.
Carrying out move, swap, copy, delete, lock and unlock
operations
To carry out move, swap, copy, delete, lock and unlock operations on
registers, use the following procedure.
1
In the REGISTER menu, select either of the following items, depending
on the type of register you wish to operate on.
Item 1 (EFFECT): key frame effect registers
Item 2 (SNAPSHOT): snapshot registers
Depending on the item you select, the EFFECT or SNAPSHOT menu
appears.
[LOCK]
MOVE
F1
The EFFECT menu also shows F6 (MERGE), the function for
combining two key frame effect registers.
For details of the merge function for key frame effects, see page 9-12.
EDIT
[UNLOCK]
COPY
SWAP DELETE
F2 F3 F4
Function key indications in the EFFECT and SNAPSHOT menus
NAME
F5 F6 F7 F8
Chapter 9 Registers
F9 F10
(Continued)
9-7