Control Of Dme Effects - Sony DVS-7300 User Manual

Control of DME Effects

From the key frame control section you can also control key frames and
effects held DME-7000/3000 units (up to four channels) connected to the
switcher.
Basically operations, from the creation of key frames to the execution of
effects, are the same as on the switcher. The menus used for path settings are
different, however, and for this refer to the BZDM-7720/3720 User's Guide.
Notes on operation
When you are using a BKDM-3010 DME Control Panel, then you can carry
out DME effect operations either on the DME control panel or on the
switcher control panel, but effects are executed using the settings
(particularly the reference channel settings) of the control panel used. Thus
an effect may execute differently on the two control panels.
8-3
Chapter 8 Key Frame Effects