Sony DVS-7300 User Manual page 389

3
Press the function key for the attribute you wish to change.
• To operate F11 to F16 to display the attributes of auxiliary bus sub-
registers, hold down the SHIFT button in the menu control section and
press F1 to F6.
• To display the attributes of a routing switcher controlled by this
switcher, press F9 (EXT) to display the setting menu, then press the
cursor movement buttons (< or ,) to align the cursor with the bus
for the routing switcher whose attributes you wish to change, and press
F7 (XPT DISABLE).
• To attach the dissolve attribute to a DME snapshot, press F6
(DURATION), and enter the dissolve duration from the numeric
keypad.
Setting a GPI output attribute
To set a GPI output attribute, use the following procedure.
1
Use the cursor movement buttons (M m < ,) to align the cursor with
the "GPI" column of the register to which you wish to apply the GPI
output attribute.
Function key indications for GPI output setting appear.
2
Press F1 to F8 to select the corresponding GPI port to apply the GPI
output attribute.
To delete a setting, press F9 (OFF).
9-15
Chapter 9 Registers