Interface With Routing Switcher
Overview
By connecting a routing switcher (DVS-V6464M or similar) to the DVS-
7300/7350 I/O expansion system via the BKDS-7700 Tally Interface Unit,
each can change cross-point settings on the other.
Functions enabled when the routing switcher is connected
When a DVS-M series routing switcher is connected to the switcher via the
BKDS-7700, the following functions are enabled besides signal names set on
the routing switcher are automatically displayed on the switcher control
panel.
• Switching cross-points on the routing switcher from the switcher panel.
• Switching cross-points on the switcher buses from the routing switcher
• Generating tally information for the system as a whole, including the
13-4
Chapter 13 Interfacing With External Devices
(See page 13-5)
remote control panel.
routing switcher, and distributing it to the various devices.
For details, see the BZS-7720 manual.