Sony DVS-7300 User Manual page 189

Combining two wipe patterns in a pattern mix
Carrying out a pattern mix requires the optional BKDS-2070 Enhanced Wipe
Option
Generator Board to be installed.
To combine the main pattern with the subsidiary pattern in a pattern mix, use
the following procedure.
1
In the PATTERN menu, press F3 (SUB), turning it on.
You can now select the subsidiary pattern.
MIX
F1
2
Press F5 (1) or F6 (2), turning it on, to display page 1 or page 2 of the
wipe pattern display.
3
Use the cursor keys (M m < ,) to select the required pattern, then
press F10 (ENTER).
The subsidiary patterns selectable depend on the main pattern used.
For more information about the available main pattern and subsidiary
pattern combinations, see page 4-97.
The pattern you have selected appears on the screen in the "SUB" area.
4
Press F1 (MIX).
The function key indications change as follows.
MIX
OFF
F1
PATTERN
MAIN SUB
F2 F3 F4
Function key indications in the PATTERN menu (after pressing F3)
PATTERN
MAIN SUB
F2 F3 F4
Function key indications in the PATTERN menu (after pressing F1)
PAGE
1 2
F5 F6 F7
MAIN/SUB LINK
SEMI FULL
OFF
F5 F6 F7
Chapter 4 Basic Operations for Image Creation
ENTER
F8 F9 F10
F8 F9 F10
(Continued)
4-105